Airvision2 — различия между версиями
Материал из pNp Wiki
Suser (обсуждение | вклад) |
Suser (обсуждение | вклад) |
||
| Строка 12: | Строка 12: | ||
'''Aircam''' | '''Aircam''' | ||
Аварийная перепрошивка камер | Аварийная перепрошивка камер | ||
| − | + | * unplug the PoE cable from the camera | |
| − | + | * configure PC to use static IP on 192.168.1.254/255.255.255.0 network; | |
| − | + | * push&hold reset button, power on the camera (keep pushing the reset...); | |
| − | + | * wait at least 10 seconds or till ping to 192.168.1.20 (this is camera IP in TFTP mode) is successful; release Reset button; | |
| − | + | * upload firmware image using tftp command: tftp 192.168.1.20; bin; put AirCam.v1.1.10874.111125.1753.bin. If you prefer you can also use any TFTP program. | |
| − | + | * camera will update FW, *Reset the configuration to defaults* and automatically reboot. | |
[[Категория:Cеверное ПО| ubiquiti]] | [[Категория:Cеверное ПО| ubiquiti]] | ||
Версия 14:01, 7 февраля 2014
Airvision2
Добавляем репозитоий airvision2
echo "deb http://www.ubnt.com/downloads/airvision/apt wheezy ubiquiti" >> /root/source.list
Добавляем ключ
wget -O - http://www.ubnt.com/downloads/airvision/apt/airvision.gpg.key | apt-key add –
Обновляем список ПО и устанавливам airvision2
aptitude update && aptitude safe-upgrade aptitude install airvision2
Заходим в систему по ссылке https://192.168.25.12:7443/
Aircam Аварийная перепрошивка камер
- unplug the PoE cable from the camera
- configure PC to use static IP on 192.168.1.254/255.255.255.0 network;
- push&hold reset button, power on the camera (keep pushing the reset...);
- wait at least 10 seconds or till ping to 192.168.1.20 (this is camera IP in TFTP mode) is successful; release Reset button;
- upload firmware image using tftp command: tftp 192.168.1.20; bin; put AirCam.v1.1.10874.111125.1753.bin. If you prefer you can also use any TFTP program.
- camera will update FW, *Reset the configuration to defaults* and automatically reboot.
