Airvision2 — различия между версиями
Suser (обсуждение | вклад) |
Suser (обсуждение | вклад) |
||
| Строка 9: | Строка 9: | ||
aptitude install airvision2 | aptitude install airvision2 | ||
Заходим в систему по ссылке https://192.168.25.12:7443/ | Заходим в систему по ссылке https://192.168.25.12:7443/ | ||
| + | |||
| + | '''Aircam''' | ||
| + | Аварийная перепрошивка камер | ||
| + | a) unplug the PoE cable from the camera | ||
| + | b) configure PC to use static IP on 192.168.1.254/255.255.255.0 network; | ||
| + | c) push&hold reset button, power on the camera (keep pushing the reset...); | ||
| + | d) wait at least 10 seconds or till ping to 192.168.1.20 (this is camera IP in TFTP mode) is successful; release Reset button; | ||
| + | e) upload firmware image using tftp command: tftp 192.168.1.20; bin; put AirCam.v1.1.10874.111125.1753.bin. If you prefer you can also use any TFTP program. | ||
| + | f) camera will update FW, *Reset the configuration to defaults* and automatically reboot. | ||
[[Категория:Cеверное ПО| ubiquiti]] | [[Категория:Cеверное ПО| ubiquiti]] | ||
Версия 14:01, 7 февраля 2014
Airvision2
Добавляем репозитоий airvision2
echo "deb http://www.ubnt.com/downloads/airvision/apt wheezy ubiquiti" >> /root/source.list
Добавляем ключ
wget -O - http://www.ubnt.com/downloads/airvision/apt/airvision.gpg.key | apt-key add –
Обновляем список ПО и устанавливам airvision2
aptitude update && aptitude safe-upgrade aptitude install airvision2
Заходим в систему по ссылке https://192.168.25.12:7443/
Aircam Аварийная перепрошивка камер a) unplug the PoE cable from the camera b) configure PC to use static IP on 192.168.1.254/255.255.255.0 network; c) push&hold reset button, power on the camera (keep pushing the reset...); d) wait at least 10 seconds or till ping to 192.168.1.20 (this is camera IP in TFTP mode) is successful; release Reset button; e) upload firmware image using tftp command: tftp 192.168.1.20; bin; put AirCam.v1.1.10874.111125.1753.bin. If you prefer you can also use any TFTP program. f) camera will update FW, *Reset the configuration to defaults* and automatically reboot.
