Airvision2 — различия между версиями

Текущая версия на 12:21, 10 июня 2014

Airvision2

Добавляем репозитоий airvision2

echo "deb http://www.ubnt.com/downloads/airvision/apt wheezy ubiquiti" >> /root/source.list

Добавляем ключ

wget -O - http://www.ubnt.com/downloads/airvision/apt/airvision.gpg.key | apt-key add –

Обновляем список ПО и устанавливам airvision2

aptitude update && aptitude safe-upgrade
aptitude install airvision2

Заходим в систему по ссылке https://192.168.25.12:7443/

Aircam Аварийная перепрошивка камер

unplug the PoE cable from the camera
configure PC to use static IP on 192.168.1.254/255.255.255.0 network;
push&hold reset button, power on the camera (keep pushing the reset...);
wait at least 10 seconds or till ping to 192.168.1.20 (this is camera IP in TFTP mode) is successful; release Reset button;
upload firmware image using tftp command:

tftp 192.168.1.20 
bin 
put AirCam.v1.1.10874.111125.1753.bin

If you prefer you can also use any TFTP program.

camera will update FW, *Reset the configuration to defaults* and automatically reboot.

@@ Строка 8: / Строка 8: @@
   aptitude update && aptitude safe-upgrade
   aptitude install airvision2
+Заходим в систему по ссылке https://192.168.25.12:7443/
+'''Aircam'''
+Аварийная перепрошивка камер
+* unplug the PoE cable from the camera
+* configure PC to use static IP on 192.168.1.254/255.255.255.0 network;
+* push&hold reset button, power on the camera (keep pushing the reset...);
+* wait at least 10 seconds or till ping to 192.168.1.20 (this is camera IP in TFTP mode) is successful; release Reset button;
+* upload firmware image using tftp command:
+ tftp 192.168.1.20
+ bin
+ put AirCam.v1.1.10874.111125.1753.bin
+If you prefer you can also use any TFTP program.
+* camera will update FW, *Reset the configuration to defaults* and automatically reboot.
+[[Категория:Cеверное ПО]] [[Категория:ubiquiti]]